N1s replacement controller – four phases / cables

Home › Forums › Hacks, mods and optimisations › N1s replacement controller – four phases / cables

Viewing 1 reply thread
  • Author
    Posts
    • 13/02/2019 at 21:34 #1649
      Sunny BSunny
      Participant

      I have a modified controller which works great. There are five motor cables. Due to another mod I have planned, I need to connect the new device to the plus, minus and ground. Which cable is which on the controller?

      • This topic was modified 5 years, 10 months ago by Sunny BSunny.
    • 16/02/2019 at 14:48 #1651
      Sebastian RothmayerSebastian Rothmayer
      Participant

      Hello sunny,

      on the Controller are the black cable minus and the red are plus. (comes direct from the battery)

      The green,yellow and blue are the motor cables for the three phases.

      In the DC wires are no ground needed (there are no contact with the ground)

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.