Hi,
So i read all your comments about programming a lingbo Controller.
I have a Super Soco Ts street Hunter and im trying to speed it up to around 75 Km/h and change some other settings
I do only have the big connector (30 pins) and tried this:
pin 6 or 7 or 16 GND, pin 13 RXD, pin 23 TXD and pin 29 3.3V.
I tried these Versions:
v120.17.0222
v121.18.0329
v3.3.0
v4.0.0
On Com port 4 as the device manager says. but i get a Timeout at every Version.
Photo of Setup attached
Attachments:
You must be
logged in to view attached files.