Forum Replies Created
-
Posts
-
Jens – Still same problem? If yes i would uninstall everything and start all over from the beginning. Be sure to press all connectors together firmly.
Good luck with installation. Mine works perfect, but as i said before my cruise control is not working and the side stand protection is out of work. Range is also sacrified but i wouldn’t go back to the old setup anyway.
Yes, that’s the correct one but they will probably contact you and ask for photos of your existing setup just to be sure. I chosed DHL delivery and i think i got it in a week or so. The setup is very easy and they will send you videos to walk you thru all steps (or you can take a look at the Enricos links above). As stated above the replacement controller is a bit bigger than the old one and also an extra small controller needs to be side by side with the new one. Depending on your skills you can drill new holes or use duct tape. I went for the lazy second tape choice 🙂
Top speed is now good, but you’ll loose like 10-15% range. Also cruise control is sacrificed. Today when my battery went below 10% the battery counter acted strange and told me i had 0% battery left…
Today we had good conditions in Sweden and the N1S took me to 85km/h. Not bad at all but also a bit scary…
Yoram; The acceleration is about the same as before, it’s a bit rougher at start but then it’s as usual. The acceleration after about 55km / h is slow.
You take away the old controller and put the new one either in the same direction or turn it 90degrees. I reused one nut to the new controller and some additional duct tape.
I definitely think the upgrade is worth the money. Speed after upgrade is now between 55km/h to 70km/h depending on conditions. You loose a bit of range though and cruise control is no longer working.
The replacement controller is a bit bigger than the old one. I used one of the existing nuts and woven tape to keep it fixed and in place.
Hi, i ordered from the link supplied by Enrico and installed it today. Works like a charm. My N1S is manufactured 201801 (according to Swedish Transportstyrelsen). When i ordered the seller asked me to send photos of the existing controller and i did. The one i received is the same as Enrico got. Installation is easy, only 15 minutes or so.