[Sebastian Rothmayer]

Hello sunny,

on the Controller are the black cable minus and the red are plus. (comes direct from the battery)

The green,yellow and blue are the motor cables for the three phases.

In the DC wires are no ground needed (there are no contact with the ground)

[Sebastian Rothmayer]

Hallo Emmanuel,

 

i had the same issue a time ago, the Problem was the switch in the side stand was broken (its a weak plastic) my Dealer changed it in warrenty

[Sebastian Rothmayer]

I would like to see total distance since last charge  (like the forecast only i the other direction)

[Sebastian Rothmayer]

Hello Lukasz,

the cabling looks wrong.

you must disconnect the Hall sensor cable and connect it with the new controller board.

Attachments:

You must be logged in to view attached files.

[Sebastian Rothmayer]

[quote quote=1445] Also cruise control is sacrificed.[/quote]

Mh thats interesting,because i have Order an other Replacement Controller from NiuTech https://www.ebuy7.com/item/563552512497 (N1S18-IDC Current Strip Version )and i can use it like before.

• This reply was modified 6 years, 6 months ago by Sebastian Rothmayer.

[Sebastian Rothmayer]

Hi Eddy,

with which software you are attempt the connection ?

i have first the same timeout problem and its important to use the right software Version for the Controller.

By me worked the LBGUI_v121.18.0329

Here are some Versions i found

https://drive.google.com/drive/folders/1ZBXscIUssj2y7akjxSmxm30SJVLfPGCa?usp=sharing

[Author]

Posts